专注于水冷螺杆、风冷涡旋冷水机组,海外订单请直接联系在线客服,谢谢支持!

专注制冷设备行业!质量严格把关,制冷行业领航者!冷水机组|螺杆式|箱式|水冷|风冷

如何正确使用工业冷冻机?

    工业冷冻机是一款可以提供工艺低温冷冻水的制冷设备,温度不仅可控制在0~35℃,更可以控制在零下40℃,从而达到工业制冷的目的。下面朝腾机械就为您介绍如何正       确使用工业冷冻机。

    1、来操作这台工业冷冻机的操作人员,一定要有工作经验,并经过相关培训,掌握操作技能,能够遵守安全操作规程来进行工作。

   2、在操作冷冻机之前,要先检查冷却水阀是否打开,冷冻机的水箱是否有加满水,冷却水压是否正常,切忌在缺水时进行操作。

   3、水冷式冷冻机的开启顺序是:先开冷却水泵,再开启压缩机;而关机顺序则是先关闭压缩机,然后关闭冷却水泵。

   4、工业冷冻机的冷冻水温度不可设置太低,否则会降低机组的制冷效率,并有可能导致机组出现低温保护动作而停机。您将温度设定在工厂需求温度稍低即可,必要时可以一边操作一边调试,根据实际需要来调设水温。

   5、当工业冷冻机出现故障报警导致停机后,一定要先将机组停机(按停机按钮),然后检查故障原因,在故障没有排除前不得强行开机运行。故障问题严重时,请记得联系工业冷冻机厂家来进行维修处理。

  6、在没有紧急的情况下,不可通过切断主机电源来关闭机组。如果在运行时工业冷冻机发生异常情况,应立即关闭电源并通知维修人员处理。

 7、如果在冬季不需要使用工业冷冻机,机组要长期停止运行,请先关闭机组,再关闭电源。记得一定要将系统内部的水排放干净,并用布罩将冷冻机遮盖起来。

   

For foreigner

The industrial refrigerator is a refrigeration equipment which can provide the process of low temperature chilled water. The temperature can be controlled not only at 0~35 degrees, but also at 40 degrees below zero, so as to achieve the purpose of industrial refrigeration. Following the Teng machinery, for you to introduce how to correctly use industrial refrigerators.

1, to operate the industrial refrigerator operators, must have work experience, and through the relevant training, master the operation skills, be able to comply with the safety operation regulations to work.

2, before the operation of the refrigerator, check whether the cooling water valve is opened, the refrigerator water tank is filled with water, cooling water pressure is normal, and must not operate in water shortage.

3. The opening sequence of water-cooled chiller is: first open the cooling water pump, then open the compressor; and the order of shutdown is to turn off the compressor first, then turn off the cooling water pump.

4, industrial refrigeration chiller water temperature can not be set too low, otherwise it will reduce the unit cooling efficiency, and may cause the unit to appear low temperature protection action and stop. You set the temperature in the factory demand temperature is slightly lower, if necessary, you can operate while debugging, according to actual needs to adjust the water temperature.

5, when the industrial refrigerator malfunction alarm, resulting in downtime, we must first stop the machine (press the stop button), and then check the cause of the failure, the failure is not ruled out, not forced to start running. When the trouble is serious, please remember to contact the industrial refrigerator manufacturer for maintenance.

6, in the absence of emergency circumstances, not by cutting off the main power supply to shut down the unit. If there is an abnormal situation in the industrial chiller at the time of operation, the power shall be switched off immediately and notify the maintenance personnel to deal with it.

7, if you do not need to use industrial refrigerators in winter, the unit will stop running for a long time, please turn off the power unit first, then turn off the power supply. Remember to clean the water inside the system and cover the freezer with a cloth cover.



点击次数:  更新时间:2017-06-30 20:26:35